The following example is located as LPT2. The manufacturer does not make any representations or warranties implied or otherwise regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages. If it is your first time to setup HyperTerminal, you will see the following page during the setup procedure. You will receive a message stating that the software you are installing has not passed Windows Logo testing. Three USB receptacles type A downstream ports. For the use of all functions Externally powered 1.

Uploader: Kagatilar
Date Added: 15 April 2012
File Size: 8.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 51770
Price: Free* [*Free Regsitration Required]

For modem users, we advise you to install the modem driver diccota before connecting the modem to the converter, otherwise it might operate unexpectedly. After trying the above procedures and your device still cannot work, please contact the technical support at your local distributor. Ethernet Port Installation C1. Blinking to indicate that the data is being received or transmitted through the RJ port.

One DB-9 RS serial interface connector supports baud rates from 2, to If the installation process is completed and some of the devices still don’t work, please click on Start, Settings, Control Panel, double-click System, and Device Manager.

What’s missing? Tell us about it.

Please note that if the external power adaptor is not be used and heavy power consumption USB device is connected, the 3 downstream ports may not function normally.


If you have installed a printer device before, go to Start, Settings, and Printers. The Add Printer Wizard will start and assist you to install a new printer device. Please Unplug the USB cable.

Instruction Thank you dixota ordering Harbour 2. Windows will ask you which port the printer will be used, idcota USB Also can add one extra Ethernet port to your PC or notebook in seconds. If not, please go to Start, Settings, and Control Panel. Select the printer manufacturer and model name from the list provided by the wizard or use the printer driver diskette came with your printer. For full functions 4. Improve the inconvenience of configuring old PC solutions like card extension solutions, which require adjusting IRQ or jumper settings and the incompatibility of various brands of docking solutions or bus repeaters.

Printer Haebour had been removed. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by plugging the device in and out, the user can try to correct the interference by one or more of the following measures: Ethernet Port Installation B1.

This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of the FCC Rules. Click the Connect using item to indicate the proper COM port, which appeared in step 1.


A minimum harboug 16M bytes of RAM. The following example is located as LPT2.

If it is your first time to setup HyperTerminal, you will see the following page during the setup procedure. It’s a community-based project which helps to repair anything. Power on your computer and make sure that the USB port is enabled and working properly. When only the Host power is supplied, the Power LED will turn RED, and the serial, parallel, keyboard, mouse, Ethernet and 3 downstream ports can operate without the external power adapter.

Page 7 of Dicota Network Card 2 User Guide |

One 2A switching power adapter. For the use of all functions Externally powered 1. Follow the instructions to complete the setup.

One RJ45 Ethernet connector. Please install Harbour 2. Avoid the hassle of removing your PC case, or rebooting the operating system during installation. There are three USB indicators.